Physical Features
Dimension (W×H×D) 90mm × 80mm × 62mm
Power dissipation 7W
 
Memory
Program memory 6KB, 4K for common users, 2K for encrypted users
Data memory 2KB
Power-failure retention power button battery
 
General
Timers in total
      1ms
      10ms
      100ms		 128（T0-T127）
4
16
108
Counters in Total 128 (button battery)
Internal memory bit 128 (button battery)
Power-failure retention of internal memory 112
Time interrupts 2×1ms resolution
Edge interrupts 4 rising edges / falling edges
Boolean execution speed 0.5µs
Float execution speed 16µs
Runtime clock Available
 
Integrated Communication Function
Communication port PORT0: RS485
PPI Baud Rate 9.6, 19.2kbps
Maximum cable length per segment
      Isolated repeater applied
      Isolated repeater unapplied		 　
38.4k for 1200m
50m
Maximum number of stations 4 stations per segment, 32 stations per network
Maximum number of masters 16
Point to point (PPI  Mater Mode) N/A
 
Power Function
Input Voltage 85-264V AC (47-63Hz)
+5V power for the extended bus N/A
24 VDC Sensor Power supply 240 mA
 
I/O
Number of integrated Digital inputs 8
Input type Sink / Source
Number of integrated Digital outputs 6
Output type Relay, dry contact
Digital I/O mapping area 128 (64 inputs / 64 outputs)
Analog I/O mapping area 32 (16 inputs / 16 outputs)
Maximum number of expandable I/O modules 0
Maximum number of digital I/O 14
Maximum number of  analog I/O 0
Pulse Catch inputs 8
High-speed counters
Single phase counters		 4×50KHz.  Support HSC0, HSC3, HSC4 and HSC5.  Do not support HSC1 and HSC2
 
Digital Input Features
Number of integrated digital input 8
Input type Sink / Source
Rated voltage 24V DC
Maximum continuous permissible voltage 30V DC
 Logical 1 Signal (minimum)
Logical  0 Signal (Maximum )		 14V DC, 2.5mA
5V DC, 1mA
Isolation (field side  and logical circuit)
Optical isolation (Galvanic)
Isolation group		  
500V AC, 1 minute
Refer to the Terminal Identification
Simultaneous Inputs 8
Maximum cable length
Shielded
Unshielded		  
500m (standard input), 50m (high-speed counter input)
300m (standard input)
 
Digital Output Features
Number of integrated digital output 6
Output type Relay, dry contact
Maximum rated current of each output
Surge Current		 2A
5A, 4S@10% duty ratio
Lamp load(Max) 30W DC / 200W AC
On- state resistance 0.2 ohm
Simultaneous output 6
Two parallel outputs N/A
Maximum cable length
      Shielded
      Unshielded		  
500m (standard output)
150m (standard output)