

| Product Code | PLC300-C36C | ||
| Description | CAN open | ||
|
Physical Features |
|||
| Dimension (W×H×D) | 137 mm × 80 mm × 62 mm | ||
| Power Dissipation | 7 W | ||
|
Memory Features |
|||
| Program Memory | 48KB. 24KB for common users, 24KB for encrypted users | ||
| Data Memory | 10KB, Can be extended to 110KB | ||
| Ultra capacitor | 112 hours | ||
| External battery | 200 hours | ||
|
General Features |
|||
|
Timers in total 1ms 10ms 100ms |
256 4 16 236 |
||
| Counters in total | 256 (ultra capacitor backup) | ||
| Internal Memory Bits | 256 (ultra capacitor backup) | ||
| Power-failure retention of internal memory | 112 (EEPROM backup) | ||
| Time interrupts | 2 × 1 ms resolution | ||
| Edge interrupts | 4 rising edges / falling edges | ||
| Simulation potentiometer | Double 8 bit resolution | ||
| Boolean execution speed | 0.15µs | ||
| Float execution speed | 8µs | ||
| Runtime clock | built-in | ||
|
Power Supply +5V 24V |
660 mA 280 mA |
||
|
Integrated Communication Features |
|||
| Communication ports | 2 (DB 9 port); POTT0: PPI / Freeport, RS485; POTT1: PPI / Freeport, RS485 | ||
| PPI Baud Rate | 9.6, 19.2 kbps and 187.5 kbps | ||
| Baud Rate of Freeport | 1.2 kbps to 115.2 kbps | ||
|
Maximum cable length per segment Isolated repeater applied Isolated repeater unapplied |
When it is 1200 m, 38.4k. 50m |
||
| Maximum number of stations | 32 stations per segment, 126 stations per network | ||
| Maximum number of masters | 32 | ||
| Point to point (PPI Mater Mode) | 8, 2 reserves | ||
|
Power Function (CANopen) |
|||
| Communication interface | 1 (4 hole terminals) | ||
|
I/O Features |
|||
| Number of integrated Digital inputs | 14 | ||
| Input type | Sink / Source | ||
| Digital output points | 10 | ||
| Output type | Solid-MOSFET (Source) | ||
| Digital I/O mapping area | 256 (128 input / 128 output ) | ||
| Analog I/O mapping area | 64 (32 input / 32 output) | ||
| Maximum number of expandable I/O modules | 7 | ||
| Pulse catch inputs | 14 | ||
|
High-speed counters Amount Single phase counters WO phase counter |
6 (HSC0 and HSC1) 6 × 30 KHz 4 × 20 KHz |
||
|
Digital Input Features |
|||
| Integrated Digital Input | 14 | ||
| Input type | Sink / Source | ||
| Rated Voltage | 24 V DC | ||
| Maximum continuous permissible voltage | 30 V DC | ||
|
Logical 1 Signal (Minimum) Logical 0 Signal (Maximum ) |
18 V DC, 2.5 mA 5 V DC, 1 mA |
||
|
Isolation (field side and logical circuit) Optical isolation (Galvanic) |
500 V AC, 1 minute |
||
| Simultaneous Inputs | 14 | ||
|
Maximum cable length Shielded Unshielded |
500 m (standard input) and 50m (high-speed counter input) 300 m (standard input) |
||
|
Digital Output Features |
|||
| Number of integrated digital output | 10 | ||
| Output type | Solid-MOSFET (Sink) | ||
|
Maximum rated current of each output Surge Current |
0.5 A 8 A, 100 millisecond |
||
| Lamp load (Max) | 3.75 W | ||
| On- state resistance | 0.3 ohm, Max: 0.6 ohm | ||
| High-speed pulse output |
2 × 50 KHz Support MC_PTP_R/MC_SPEED_CTRL etc. of CPU, do not support PTO/PWM of programming software |
||
| Simultaneous output | 10 | ||
| Two parallel outputs | only when the two outputs are in the same group | ||
|
Maximum cable length Shielded Unshielded |
500m (standard output) 150m (standard output) |
||